WELCOME

Compression spring

Compression springs for general use.
Stainless compression springs exist as a separate category, link

  • Show more info about Hide more info about Compression spring

See "full-screen" models of the springs and download a PDF file of the designed compression, tension or torsion spring!

Lesjöfors configurator for compression, tension and torsion springs allows you to design a spring based on your demands. Our CAD configurator stretches from wire diameter 0,1mm up to 15mm.

Click for information about 3D CAD!

1. Choose file format

2. Choose item in the table

3. Save file

Cat.no Dt Dm L0 Fn c Mtr 3D CAD
1260 0.6 4.6 40 13.62 0.6 EN 10270-1-SM
1266 0.6 5.6 35 11.97 0.518 EN 10270-1-SM
1267 0.6 5.6 45 11.87 0.398 EN 10270-1-SM
1274 0.6 6.6 40 10.61 0.364 EN 10270-1-SM
1280 0.6 7.6 35 9.541 0.354 EN 10270-1-SM
1281 0.6 7.6 45 9.557 0.273 EN 10270-1-SM
1288 0.6 8.6 40 8.706 0.27 EN 10270-1-SM
1295 0.75 4.75 40 22.08 1.25 EN 10270-1-SM
1300 0.75 5.75 35 21.3 1.09 EN 10270-1-SM
1301 0.75 5.75 45 23.11 0.879 EN 10270-1-SM
1308 0.75 6.75 40 19.22 0.749 EN 10270-1-SM
1313 0.75 7.75 35 17.37 0.714 EN 10270-1-SM
1314 0.75 7.75 45 17.36 0.55 EN 10270-1-SM
1322 0.75 8.75 40 15.88 0.535 EN 10270-1-SM
1329 0.75 9.75 35 14.67 0.543 EN 10270-1-SM
1330 0.75 9.75 45 14.48 0.414 EN 10270-1-SM
1338 0.75 10.75 40 13.64 0.425 EN 10270-1-SM
2878 0.63 5 39.9 17.9 0.713 EN 10270-1-SH
2882 0.63 6.3 38.5 14.86 0.535 EN 10270-1-SH
2886 0.63 8 39 12.14 0.392 EN 10270-1-SH
5869 0.63 5 38.5 16.18 0.694 EN 10270-1-SH
5873 0.63 6.3 36.5 13.04 0.513 EN 10270-1-SH
5877 0.63 8 37 10.53 0.369 EN 10270-1-SH