WELCOME

Conical spring

Conical compression springs replace cylindrical compression springs where axial space is limited. The conical spring is chosen to allow the coils to fold into each other when the spring is completely compressed. Refer to the following table.

  • Show more info about Hide more info about Conical spring

See "full-screen" models of the springs and download a PDF file of the designed compression, tension or torsion spring!

Lesjöfors configurator for compression, tension and torsion springs allows you to design a spring based on your demands. Our CAD configurator stretches from wire diameter 0,1mm up to 15mm.

Click for information about 3D CAD!

1. Choose file format

2. Choose item in the table

3. Save file

Cat.no Dt Di De L0 Fst Lst Mtr 3D CAD
3195 1,2 7 25 25 54 1,2 EN 10270-1-SM
3196 1,2 7 25 38 54 2,8 EN 10270-1-SM
3197 1,2 7 25 50 54 3,6 EN 10270-1-SM
3199 1,5 9 30 30 78 1,5 EN 10270-1-SM
3200 1,5 9 30 45 78 3,8 EN 10270-1-SM
3201 1,5 9 30 60 78 4,5 EN 10270-1-SM
3202 1,8 7 32 30 156 1,8 EN 10270-1-SM
3206 2 8 36 35 196 2 EN 10270-1-SM
6684 0,75 6,5 15 8 10 0,75 EN 10270-3-1.4310
6685 0,75 6,5 15 15 15 0,75 EN 10270-3-1.4310
6686 0,75 6,5 15 22 15 3 EN 10270-3-1.4310
6691 1 9 20 10 22 1 EN 10270-3-1.4310
6692 1 9 20 20 22 1 EN 10270-3-1.4310
6693 1 9 20 30 26 2,5 EN 10270-3-1.4310
6695 1,2 7 25 25 54 1,2 EN 10270-3-1.4310
6696 1,2 7 25 38 54 2,8 EN 10270-3-1.4310
6697 1,2 7 25 50 54 3,6 EN 10270-3-1.4310
6702 1,5 9 30 30 78 1,5 EN 10270-3-1.4310
6703 1,5 9 30 45 78 3,8 EN 10270-3-1.4310
6704 1,5 9 30 60 78 4,5 EN 10270-3-1.4310
6708 1,8 7 32 30 156 1,8 EN 10270-3-1.4310
6715 2 8 36 35 196 2 EN 10270-3-1.4310