WELCOME

Conical spring

Conical compression springs replace cylindrical compression springs where axial space is limited. The conical spring is chosen to allow the coils to fold into each other when the spring is completely compressed. Refer to the following table.

  • Show more info about Hide more info about Conical spring

See "full-screen" models of the springs and download a PDF file of the designed compression, tension or torsion spring!

Lesjöfors configurator for compression, tension and torsion springs allows you to design a spring based on your demands. Our CAD configurator stretches from wire diameter 0,1mm up to 15mm.

Click for information about 3D CAD!

1. Choose file format

2. Choose item in the table

3. Save file

Cat.no Dt Di De L0 Fst Lst Mtr 3D CAD
3198 1,5 6 27 25 108 1,5 EN 10270-1-SM
3199 1,5 9 30 30 78 1,5 EN 10270-1-SM
3200 1,5 9 30 45 78 3,8 EN 10270-1-SM
3201 1,5 9 30 60 78 4,5 EN 10270-1-SM
3203 1,8 11 35 35 117 1,8 EN 10270-1-SM
3204 1,8 11 35 52 117 4,5 EN 10270-1-SM
3205 1,8 11 35 70 117 5,4 EN 10270-1-SM
6701 1,5 6 27 25 108 1,5 EN 10270-3-1.4310
6702 1,5 9 30 30 78 1,5 EN 10270-3-1.4310
6703 1,5 9 30 45 78 3,8 EN 10270-3-1.4310
6704 1,5 9 30 60 78 4,5 EN 10270-3-1.4310
6709 1,8 11 35 35 117 1,8 EN 10270-3-1.4310
6710 1,8 11 35 52 117 4,5 EN 10270-3-1.4310
6711 1,8 11 35 70 117 5,4 EN 10270-3-1.4310
6713 1,8 16 35 35 80 1,8 EN 10270-3-1.4310
6714 1,8 16 35 52 90 3,6 EN 10270-3-1.4310
6720 2 18 40 45 90 2 EN 10270-3-1.4310
6721 2 18 40 68 120 4 EN 10270-3-1.4310
6722 2 18 40 90 120 6 EN 10270-3-1.4310
6734 3 27 60 30 85 3 EN 10270-3-1.4310