WELCOME

Conical spring

Conical compression springs replace cylindrical compression springs where axial space is limited. The conical spring is chosen to allow the coils to fold into each other when the spring is completely compressed. Refer to the following table.

  • Show more info about Hide more info about Conical spring

See "full-screen" models of the springs and download a PDF file of the designed compression, tension or torsion spring!

Lesjöfors configurator for compression, tension and torsion springs allows you to design a spring based on your demands. Our CAD configurator stretches from wire diameter 0,1mm up to 15mm.

Click for information about 3D CAD!

1. Choose file format

2. Choose item in the table

3. Save file

Cat.no Dt Di De L0 Fst Lst Mtr 3D CAD
3202 1,8 7 32 30 156 1,8 EN 10270-1-SM
3206 2 8 36 35 196 2 EN 10270-1-SM
3207 2 12 40 45 147 2 EN 10270-1-SM
3208 2 12 40 68 147 5 EN 10270-1-SM
3209 2 12 40 90 147 6 EN 10270-1-SM
3211 2,5 15 50 50 200 2,5 EN 10270-1-SM
3212 2,5 15 50 75 200 6,3 EN 10270-1-SM
3213 2,5 15 50 100 200 7,5 EN 10270-1-SM
6708 1,8 7 32 30 156 1,8 EN 10270-3-1.4310
6715 2 8 36 35 196 2 EN 10270-3-1.4310
6716 2 12 40 45 147 2 EN 10270-3-1.4310
6717 2 12 40 68 147 5 EN 10270-3-1.4310
6718 2 12 40 90 147 6 EN 10270-3-1.4310
6724 2,5 15 50 50 200 2,5 EN 10270-3-1.4310
6725 2,5 15 50 75 200 6,3 EN 10270-3-1.4310
6726 2,5 15 50 100 200 7,5 EN 10270-3-1.4310
6728 2,5 22 50 50 140 2,5 EN 10270-3-1.4310
6729 2,5 22 50 75 190 6,3 EN 10270-3-1.4310
6735 3 27 60 60 200 7,5 EN 10270-3-1.4310
6736 3 27 60 90 200 9 EN 10270-3-1.4310