WELCOME

Wave spring

Multi-coil wave springs are made from flat spring material and are suitable for use in applications where a low mounting dimension is required. Both the total length and working height of a multi-coil wave spring are lower than is the case in conventional round wire springs; a reduction in mounting dimension of up to 50% can be achieved.

  • Show more info about Hide more info about Wave spring
  • All measurements are in mm

See "full-screen" models of the springs and download a PDF file of the designed compression, tension or torsion spring!

Lesjöfors configurator for compression, tension and torsion springs allows you to design a spring based on your demands. Our CAD configurator stretches from wire diameter 0,1mm up to 15mm.

Click for information about 3D CAD!

1. Choose file format

2. Choose item in the table

3. Save file

Cat.no A B L0 Fn c Mtr 3D CAD
5690 9,5 6,4 4 29,4 18,4 CK67 (1.1231)
5691 9,5 6,4 5 29,4 13,8 CK67 (1.1231)
5692 9,5 6,4 7 29,4 11 CK67 (1.1231)
5693 9,5 6,4 8 29,4 9,2 CK67 (1.1231)
5694 9,5 6,4 9 29,4 7,9 CK67 (1.1231)
5695 9,5 6,4 10 29,4 6,9 CK67 (1.1231)
5696 9,5 6,4 12 29,4 6,1 CK67 (1.1231)
5697 9,5 6,4 13 29,4 5,5 CK67 (1.1231)
5698 9,5 6,4 14 29,4 5 CK67 (1.1231)
S5690 9,5 6,4 4 27,342 17,112 EN 10270-3-1.4310
S5691 9,5 6,4 5 27,342 12,834 EN 10270-3-1.4310
S5692 9,5 6,4 7 27,342 10,23 EN 10270-3-1.4310
S5693 9,5 6,4 8 27,342 8,556 EN 10270-3-1.4310
S5694 9,5 6,4 9 27,342 7,347 EN 10270-3-1.4310
S5695 9,5 6,4 10 27,342 6,417 EN 10270-3-1.4310
S5696 9,5 6,4 12 27,342 5,673 EN 10270-3-1.4310
S5697 9,5 6,4 13 27,342 5,115 EN 10270-3-1.4310
S5698 9,5 6,4 14 27,342 4,65 EN 10270-3-1.4310