3161: CS 10X63X73
All dimensions are in mm
Dt = Wire diameter
Dm = Mean diameter
Lo = Unloaded length
nt = Total number of coils
Po = Pitch
Ln = Permitted loaded length for dynamic load
Fn = Spring force in Newtons at Ln
R = Rate
Lst = Solid length = Dt x nt
s = Deflection
Coiling: Right hand
Material:
Dt 0.20–10 = EN 10270-1-SM
Dt 12–14 = EN 10270-1-SH
Tolerances:
You can find information about tolerances for our springs if you follow this link.
Max. working temperature:
EN 10270-1 = 120 °C
Springs with Dt ≤ 0.4 do not have ground end coils, others have 3/4 end coils ground. Springs with Dt ≥ 2.0 are shot peened. Static loaded springs or springs with a low number of intended load deflections can be allowed to be scragged to solid length (Lst). A certain relaxation (load loss) will then appear.
1 kp = 9.80665 Newtons, 1 Newton = 0.10197 kp