WELCOME

Disc Spring low force

The dimensions are adapted to standard ball bearings and are used primarily for eliminating axial play. Normally, they are fitted with the outer diameter against the outer ring of the bearing. These springs produce a relatively low force and can of course also be used in other designs. In addition to the dimensions listed below, we can also supply springs with an outer diameter of up to 358 mm upon request.

Read more on our homepage: - General information about disc springs

  • Show more info about Hide more info about Disc Spring low force
  • All measurements are in mm

See "full-screen" models of the springs and download a PDF file of the designed compression, tension or torsion spring!

Lesjöfors configurator for compression, tension and torsion springs allows you to design a spring based on your demands. Our CAD configurator stretches from wire diameter 0,1mm up to 15mm.

Click for information about 3D CAD!

1. Choose file format

2. Choose item in the table

3. Save file

Cat.no De Di t L0 h0 s 75% F 75% 3D CAD
5048 84,5 60,5 0,9 2,5 1,6 1,2 358,7
5049 89,5 60,5 0,9 2,5 1,6 1,2 287,7
5050 89,5 65,5 0,9 2,5 1,6 1,2 335,2
5051 94,5 75,5 1 2,2 1,2 0,9 324,7
5052 99 65,5 1 2,6 1,6 1,2 292,3
5053 99 70,5 1 2,6 1,6 1,2 332,2
5054 109 70,5 1,25 2,7 1,45 1,087 357,1
5055 109 75,5 1,25 2,7 1,45 1,087 397,9
5056 114 90,5 1,25 2,45 1,2 0,9 398,1
5057 119 75,5 1,25 2,8 1,55 1,162 319,9
5058 119 85,5 1,25 2,8 1,55 1,162 392,5
5059 124 90,5 1,25 3 1,75 1,312 444,7
5060 129 85,5 1,25 3,2 1,95 1,462 405,1
5061 129 95,5 1,25 3,2 1,95 1,462 500
5062 139 90,5 1,25 3,25 2 1,5 353,6
5063 139 101 1,25 3,25 2 1,5 429,3
5064 149 95,5 1,5 3,2 1,7 1,275 379,4
5065 149 106 1,5 3,2 1,7 1,275 450,2