COMPRESSION SPRINGS
Compression spring
Stainless spring
Wave spring
Conical spring
Vibrator spring
Compression spring coil
Die spring
Micro springs
EXTENSION & TORSION
Extension spring
Extension spring with turnable loops
Extension spring with turnable bolt
Extension spring coils
Thread fitting
Spring socket
Torsion spring single
Double torsion
LOCKING SPRINGS
Locking pin A
Locking pin B
Locking pin C
Locking pin T
Locking pin S & R
Locking pin T-S
Spring Nuts
Spring clip
Tool clip
Locking clip type SLM
Attachment ring shaft
Attachment ring bore
Retaining ring shaft SW
Retaining ring bore SB
Retaining washer
Retaining ring shaft SGA
Retaining ring bore SGH
STRIP SPRINGS
Motor spring
Clock spring
Constant force spring
Slide bearing
DISC SPRINGS
Disc Spring
Disc Spring low force
Tensioning Washer
Tensioning washer
Lock Washer type A
Lock Washer type B
Lock Washer type C
Wave spring washer
Finger spring washer
Curved washer
GAS SPRINGS
Threaded ends
Welded loops
Stainless
Force reduction
Safety lock
Furniture application
Lockable Gas Spring
End Fitting Loop
End Fitting Bracket
Clevis
Ball Joints
Ball Stud
End Fittings Other
Control head
Control cables
Control handles
Push-buttonsStainless spring
Compression springs for general use. Compression springs in normal spring steel exist as a separate category, link
- Show more info about Hide more info about Stainless spring
- Hide filter Show filter
Dt
Dm
Choose Dm
L0
Fn
Mtr
Choose Mtr
- All measurements are in mm
See "full-screen" models of the springs and download a PDF file of the designed compression, tension or torsion spring!
Lesjöfors configurator for compression, tension and torsion springs allows you to design a spring based on your demands. Our CAD configurator stretches from wire diameter 0,1mm up to 15mm.
Click for information about 3D CAD!
1. Choose file format
2. Choose item in the table
3. Save file
| Cat.no | Dt | Dm | DI min | L0 | Fn | c | Mtr | 3D CAD |
|---|---|---|---|---|---|---|---|---|
| 2224 | 0.25 | 1.87 | 1.50 | 15 | 1.9 | 0.25 | EN 10270-3-1.4310 | |
| 2225 | 0.25 | 1.87 | 1.50 | 20 | 1.9 | 0.18 | EN 10270-3-1.4310 | |
| 2230 | 0.25 | 2.37 | 2.00 | 15 | 1.6 | 0.17 | EN 10270-3-1.4310 | |
| 2231 | 0.25 | 2.37 | 2.00 | 20 | 1.6 | 0.13 | EN 10270-3-1.4310 | |
| 5747 | 0.25 | 2.50 | 2.13 | 15.7 | 2.0 | 0.18 | EN 10270-3-1.4310 | |
| 5748 | 0.25 | 2.50 | 2.13 | 22.9 | 2.0 | 0.12 | EN 10270-3-1.4310 | |
| 2236 | 0.25 | 2.90 | 2.50 | 15 | 1.4 | 0.13 | EN 10270-3-1.4310 | |
| 2237 | 0.25 | 2.90 | 2.50 | 20 | 1.4 | 0.10 | EN 10270-3-1.4310 | |
| 5743 | 0.25 | 2.00 | 1.63 | 16.6 | 2.5 | 0.24 | EN 10270-3-1.4310 | |
| 5751 | 0.25 | 3.20 | 2.80 | 16.1 | 1.6 | 0.13 | EN 10270-3-1.4310 | |
| 5752 | 0.25 | 3.20 | 2.80 | 23.3 | 1.6 | 0.09 | EN 10270-3-1.4310 | |
| 2242 | 0.25 | 3.40 | 3.00 | 15 | 1.3 | 0.11 | EN 10270-3-1.4310 | |
| 2243 | 0.25 | 3.40 | 3.00 | 20 | 1.3 | 0.08 | EN 10270-3-1.4310 | |
| 2203 | 0.2 | 1.32 | 1.00 | 15 | 1.4 | 0.20 | EN 10270-3-1.4310 | |
| 2204 | 0.2 | 1.32 | 1.00 | 20 | 1.4 | 0.15 | EN 10270-3-1.4310 | |
| 2207 | 0.2 | 1.82 | 1.50 | 15 | 1.1 | 0.12 | EN 10270-3-1.4310 | |
| 2208 | 0.2 | 1.82 | 1.50 | 20 | 1.1 | 0.09 | EN 10270-3-1.4310 | |
| 2212 | 0.2 | 2.32 | 2.00 | 15 | 0.90 | 0.08 | EN 10270-3-1.4310 | |
| 2213 | 0.2 | 2.32 | 2.00 | 20 | 0.90 | 0.06 | EN 10270-3-1.4310 | |
| 5727 | 0.2 | 2.50 | 2.18 | 17.9 | 1.0 | 0.07 | EN 10270-3-1.4310 | |
| 2218 | 0.2 | 2.85 | 2.50 | 15 | 0.77 | 0.07 | EN 10270-3-1.4310 | |
| 2219 | 0.2 | 2.85 | 2.50 | 20 | 0.76 | 0.05 | EN 10270-3-1.4310 | |
| 5723 | 0.2 | 2.00 | 1.68 | 18.3 | 1.3 | 0.10 | EN 10270-3-1.4310 | |
| 5767 | 0.32 | 2.50 | 2.06 | 14.2 | 4.2 | 0.49 | EN 10270-3-1.4310 | |
| 5768 | 0.32 | 2.50 | 2.06 | 20.6 | 4.2 | 0.33 | EN 10270-3-1.4310 | |
| 5763 | 0.32 | 2.00 | 1.56 | 15.6 | 5.0 | 0.65 | EN 10270-3-1.4310 | |
| 5772 | 0.32 | 3.20 | 2.73 | 20.1 | 3.3 | 0.23 | EN 10270-3-1.4310 | |
| 5776 | 0.32 | 4.00 | 3.53 | 19.8 | 2.7 | 0.18 | EN 10270-3-1.4310 | |
| 2248 | 0.3 | 2.42 | 2.00 | 15 | 2.8 | 0.33 | EN 10270-3-1.4310 | |
| 2249 | 0.3 | 2.42 | 2.00 | 20 | 2.8 | 0.24 | EN 10270-3-1.4310 | |
| 2254 | 0.3 | 2.95 | 2.50 | 15 | 2.3 | 0.24 | EN 10270-3-1.4310 | |
| 2255 | 0.3 | 2.95 | 2.50 | 20 | 2.3 | 0.17 | EN 10270-3-1.4310 | |
| 2261 | 0.3 | 3.45 | 3.00 | 15 | 2.1 | 0.20 | EN 10270-3-1.4310 | |
| 2262 | 0.3 | 3.45 | 3.00 | 20 | 2.0 | 0.14 | EN 10270-3-1.4310 | |
| 2267 | 0.3 | 4.50 | 4.00 | 15 | 1.7 | 0.14 | EN 10270-3-1.4310 | |
| 3718 | 0.3 | 4.50 | 4.00 | 20 | 1.7 | 0.11 | EN 10270-3-1.4310 | |
| 5788 | 0.4 | 2.50 | 1.98 | 19.5 | 7.9 | 0.81 | EN 10270-3-1.4310 | |
| 5783 | 0.4 | 2.00 | 1.48 | 15.6 | 9.4 | 1.6 | EN 10270-3-1.4310 | |
| 2274 | 0.4 | 3.05 | 2.50 | 15 | 4.6 | 0.61 | EN 10270-3-1.4310 | |
| 2275 | 0.4 | 3.05 | 2.50 | 20 | 4.5 | 0.45 | EN 10270-3-1.4310 | |
| 5792 | 0.4 | 3.20 | 2.65 | 18.3 | 6.3 | 0.57 | EN 10270-3-1.4310 | |
| 2281 | 0.4 | 3.55 | 3.00 | 15 | 4.3 | 0.50 | EN 10270-3-1.4310 | |
| 2282 | 0.4 | 3.55 | 3.00 | 20 | 4.4 | 0.37 | EN 10270-3-1.4310 | |
| 2288 | 0.4 | 4.60 | 4.00 | 15 | 3.7 | 0.36 | EN 10270-3-1.4310 | |
| 2289 | 0.4 | 4.60 | 4.00 | 20 | 3.7 | 0.26 | EN 10270-3-1.4310 | |
| 5796 | 0.4 | 4.00 | 3.45 | 17.5 | 5.2 | 0.43 | EN 10270-3-1.4310 | |
| 2294 | 0.4 | 5.60 | 5.00 | 15 | 3.3 | 0.30 | EN 10270-3-1.4310 | |
| 2295 | 0.4 | 5.60 | 5.00 | 20 | 3.3 | 0.21 | EN 10270-3-1.4310 | |
| 5800 | 0.4 | 5.00 | 4.40 | 16.4 | 4.2 | 0.34 | EN 10270-3-1.4310 | |
| 5833 | 0.5 | 2.50 | 1.88 | 17.5 | 12 | 2.0 | EN 10270-3-1.4310 | |
| 2301 | 0.5 | 3.15 | 2.50 | 15 | 9.7 | 1.4 | EN 10270-3-1.4310 | |
| 2302 | 0.5 | 3.15 | 2.50 | 20 | 9.6 | 1.1 | EN 10270-3-1.4310 | |
| 5837 | 0.5 | 3.20 | 2.55 | 16 | 11 | 1.4 | EN 10270-3-1.4310 | |
| 5838 | 0.5 | 3.20 | 2.55 | 23.5 | 11 | 0.94 | EN 10270-3-1.4310 | |
| 2307 | 0.5 | 3.65 | 3.00 | 15 | 8.6 | 1.1 | EN 10270-3-1.4310 | |
| 2308 | 0.5 | 3.65 | 3.00 | 20 | 8.4 | 0.81 | EN 10270-3-1.4310 | |
| 2313 | 0.5 | 4.70 | 4.00 | 15 | 6.9 | 0.73 | EN 10270-3-1.4310 | |
| 2314 | 0.5 | 4.70 | 4.00 | 20 | 6.8 | 0.54 | EN 10270-3-1.4310 | |
| 5841 | 0.5 | 4.00 | 3.35 | 15 | 9.3 | 1.0 | EN 10270-3-1.4310 | |
| 5842 | 0.5 | 4.00 | 3.35 | 21.5 | 9.3 | 0.71 | EN 10270-3-1.4310 | |
| 2320 | 0.5 | 5.70 | 5.00 | 15 | 6.3 | 0.59 | EN 10270-3-1.4310 | |
| 2321 | 0.5 | 5.70 | 5.00 | 20 | 6.1 | 0.43 | EN 10270-3-1.4310 | |
| 5847 | 0.5 | 5.00 | 4.30 | 20.5 | 7.6 | 0.54 | EN 10270-3-1.4310 | |
| 5851 | 0.5 | 6.30 | 5.60 | 20 | 6.4 | 0.41 | EN 10270-3-1.4310 | |
| 2326 | 0.5 | 6.75 | 6.00 | 15 | 5.7 | 0.50 | EN 10270-3-1.4310 | |
| 2327 | 0.5 | 6.75 | 6.00 | 20 | 5.4 | 0.35 | EN 10270-3-1.4310 | |
| 2333 | 0.5 | 7.75 | 7.00 | 15 | 5.2 | 0.44 | EN 10270-3-1.4310 | |
| 2334 | 0.5 | 7.75 | 7.00 | 20 | 5.1 | 0.31 | EN 10270-3-1.4310 | |
| 5883 | 0.63 | 3.20 | 2.42 | 15.5 | 19 | 3.5 | EN 10270-3-1.4310 | |
| 5884 | 0.63 | 3.20 | 2.42 | 22.5 | 19 | 2.4 | EN 10270-3-1.4310 | |
| 5888 | 0.63 | 4.00 | 3.22 | 20 | 17 | 1.8 | EN 10270-3-1.4310 | |
| 5893 | 0.63 | 5.00 | 4.17 | 18.5 | 15 | 1.4 | EN 10270-3-1.4310 | |
| 5897 | 0.63 | 6.30 | 5.47 | 17 | 12 | 1.0 | EN 10270-3-1.4310 | |
| 5901 | 0.63 | 8.00 | 7.12 | 16 | 9.5 | 0.80 | EN 10270-3-1.4310 | |
| 3715 | 0.6 | 4.80 | 4.00 | 15 | 11 | 1.3 | EN 10270-3-1.4310 | |
| 2340 | 0.6 | 4.80 | 4.00 | 20 | 11 | 0.98 | EN 10270-3-1.4310 | |
| 2346 | 0.6 | 5.80 | 5.00 | 15 | 10 | 1.1 | EN 10270-3-1.4310 | |
| 2347 | 0.6 | 5.80 | 5.00 | 20 | 9.7 | 0.76 | EN 10270-3-1.4310 | |
| 2353 | 0.6 | 6.85 | 6.00 | 15 | 8.9 | 0.86 | EN 10270-3-1.4310 | |
| 2354 | 0.6 | 6.85 | 6.00 | 20 | 8.7 | 0.61 | EN 10270-3-1.4310 | |
| 2360 | 0.6 | 7.85 | 7.00 | 15 | 8.6 | 0.76 | EN 10270-3-1.4310 | |
| 2361 | 0.6 | 7.85 | 7.00 | 20 | 8.2 | 0.54 | EN 10270-3-1.4310 | |
| 2367 | 0.6 | 8.85 | 8.00 | 15 | 8.0 | 0.68 | EN 10270-3-1.4310 | |
| 2368 | 0.6 | 8.85 | 8.00 | 20 | 7.7 | 0.49 | EN 10270-3-1.4310 | |
| 2409 | 0.75 | 10.0 | 9.00 | 15 | 13 | 1.2 | EN 10270-3-1.4310 | |
| 2410 | 0.75 | 10.0 | 9.00 | 20 | 13 | 0.87 | EN 10270-3-1.4310 | |
| 2417 | 0.75 | 11.1 | 10.00 | 15 | 13 | 1.1 | EN 10270-3-1.4310 | |
| 2418 | 0.75 | 11.1 | 10.00 | 20 | 12 | 0.79 | EN 10270-3-1.4310 | |
| 2374 | 0.75 | 4.95 | 4.00 | 15 | 17 | 2.8 | EN 10270-3-1.4310 | |
| 2375 | 0.75 | 4.95 | 4.00 | 20 | 17 | 2.1 | EN 10270-3-1.4310 | |
| 2380 | 0.75 | 5.95 | 5.00 | 15 | 18 | 2.2 | EN 10270-3-1.4310 | |
| 2381 | 0.75 | 5.95 | 5.00 | 20 | 17 | 1.6 | EN 10270-3-1.4310 | |
| 2387 | 0.75 | 7.00 | 6.00 | 15 | 16 | 1.8 | EN 10270-3-1.4310 | |
| 2388 | 0.75 | 7.00 | 6.00 | 20 | 16 | 1.3 | EN 10270-3-1.4310 | |
| 2393 | 0.75 | 8.00 | 7.00 | 15 | 15 | 1.5 | EN 10270-3-1.4310 | |
| 2394 | 0.75 | 8.00 | 7.00 | 20 | 14 | 1.1 | EN 10270-3-1.4310 | |
| 2401 | 0.75 | 9.00 | 8.00 | 15 | 15 | 1.4 | EN 10270-3-1.4310 | |
| 2402 | 0.75 | 9.00 | 8.00 | 20 | 14 | 0.97 | EN 10270-3-1.4310 | |
| 5951 | 0.8 | 10.0 | 8.95 | 20 | 16 | 1.1 | EN 10270-3-1.4310 | |
| 5934 | 0.8 | 4.00 | 3.05 | 19.5 | 30 | 4.7 | EN 10270-3-1.4310 | |
| 5938 | 0.8 | 5.00 | 4.00 | 17.5 | 28 | 3.5 | EN 10270-3-1.4310 | |
| 5942 | 0.8 | 6.30 | 5.30 | 15.5 | 24 | 2.7 | EN 10270-3-1.4310 | |
| 5943 | 0.8 | 6.30 | 5.30 | 23 | 23 | 1.8 | EN 10270-3-1.4310 | |
| 5946 | 0.8 | 8.00 | 6.95 | 14.5 | 20 | 2.1 | EN 10270-3-1.4310 | |
| 5947 | 0.8 | 8.00 | 6.95 | 21.5 | 19 | 1.3 | EN 10270-3-1.4310 | |
| 6041 | 1.25 | 10.0 | 8.50 | 20 | 78 | 6.4 | EN 10270-3-1.4310 | |
| 6032 | 1.25 | 6.30 | 4.85 | 17 | 108 | 16 | EN 10270-3-1.4310 | |
| 6036 | 1.25 | 8.00 | 6.50 | 15 | 92 | 12 | EN 10270-3-1.4310 | |
| 6037 | 1.25 | 8.00 | 6.50 | 22 | 91 | 7.9 | EN 10270-3-1.4310 | |
| 2499 | 1.2 | 10.5 | 9.00 | 20 | 42 | 3.7 | EN 10270-3-1.4310 | |
| 2505 | 1.2 | 11.5 | 10.00 | 15 | 42 | 4.8 | EN 10270-3-1.4310 | |
| 2512 | 1.2 | 13.5 | 12.00 | 20 | 38 | 2.8 | EN 10270-3-1.4310 | |
| 2483 | 1.2 | 7.45 | 6.00 | 15 | 49 | 9.0 | EN 10270-3-1.4310 | |
| 2488 | 1.2 | 8.45 | 7.00 | 20 | 46 | 5.1 | EN 10270-3-1.4310 | |
| 2493 | 1.2 | 9.45 | 8.00 | 15 | 44 | 6.1 | EN 10270-3-1.4310 | |
| 2536 | 1.5 | 10.8 | 9.00 | 15 | 73 | 11 | EN 10270-3-1.4310 | |
| 2541 | 1.5 | 11.8 | 10.00 | 20 | 69 | 7.0 | EN 10270-3-1.4310 | |
| 2371 | 1.5 | 15.8 | 14.00 | 20 | 61 | 4.9 | EN 10270-3-1.4310 | |
| 2526 | 1.5 | 8.75 | 7.00 | 15 | 73 | 16 | EN 10270-3-1.4310 | |
| 2531 | 1.5 | 9.75 | 8.00 | 20 | 76 | 9.6 | EN 10270-3-1.4310 | |
| 6086 | 1.6 | 10.0 | 8.15 | 18.5 | 151 | 17 | EN 10270-3-1.4310 | |
| 6091 | 1.6 | 12.5 | 10.60 | 24 | 124 | 8.7 | EN 10270-3-1.4310 | |
| 6081 | 1.6 | 8.00 | 6.15 | 14.5 | 165 | 33 | EN 10270-3-1.4310 | |
| 6082 | 1.6 | 8.00 | 6.15 | 21.5 | 176 | 21 | EN 10270-3-1.4310 | |
| 2567 | 1.8 | 10.1 | 8.00 | 15 | 104 | 26 | EN 10270-3-1.4310 | |
| 2573 | 1.8 | 11.1 | 9.00 | 20 | 109 | 16 | EN 10270-3-1.4310 | |
| 2366 | 1.8 | 12.1 | 10.00 | 15 | 106 | 19 | EN 10270-3-1.4310 | |
| 2586 | 1.8 | 14.1 | 12.00 | 20 | 102 | 11 | EN 10270-3-1.4310 | |
| 2599 | 1.8 | 18.2 | 16.00 | 20 | 95 | 8.0 | EN 10270-3-1.4310 | |
| 2459 | 1 | 10.3 | 9.00 | 15 | 28 | 3.0 | EN 10270-3-1.4310 | |
| 2460 | 1 | 10.3 | 9.00 | 20 | 27 | 2.1 | EN 10270-3-1.4310 | |
| 5996 | 1 | 10.0 | 8.75 | 17.5 | 29 | 2.6 | EN 10270-3-1.4310 | |
| 2467 | 1 | 11.3 | 10.00 | 15 | 26 | 2.6 | EN 10270-3-1.4310 | |
| 2468 | 1 | 11.3 | 10.00 | 20 | 25 | 1.9 | EN 10270-3-1.4310 | |
| 6001 | 1 | 12.5 | 11.20 | 24 | 23 | 1.3 | EN 10270-3-1.4310 | |
| 2476 | 1 | 13.3 | 12.00 | 20 | 24 | 1.6 | EN 10270-3-1.4310 | |
| 5983 | 1 | 5.00 | 3.80 | 17 | 46 | 8.6 | EN 10270-3-1.4310 | |
| 5984 | 1 | 5.00 | 3.80 | 24 | 45 | 5.8 | EN 10270-3-1.4310 | |
| 2425 | 1 | 6.20 | 5.00 | 15 | 35 | 6.1 | EN 10270-3-1.4310 | |
| 2426 | 1 | 6.20 | 5.00 | 20 | 34 | 4.4 | EN 10270-3-1.4310 | |
| 5987 | 1 | 6.30 | 5.10 | 14.5 | 41 | 6.6 | EN 10270-3-1.4310 | |
| 5988 | 1 | 6.30 | 5.10 | 21.5 | 41 | 4.3 | EN 10270-3-1.4310 | |
| 2433 | 1 | 7.25 | 6.00 | 15 | 33 | 4.7 | EN 10270-3-1.4310 | |
| 2434 | 1 | 7.25 | 6.00 | 20 | 32 | 3.3 | EN 10270-3-1.4310 | |
| 2442 | 1 | 8.25 | 7.00 | 15 | 31 | 3.9 | EN 10270-3-1.4310 | |
| 2443 | 1 | 8.25 | 7.00 | 20 | 30 | 2.8 | EN 10270-3-1.4310 | |
| 5992 | 1 | 8.00 | 6.75 | 19 | 34 | 3.2 | EN 10270-3-1.4310 | |
| 2450 | 1 | 9.25 | 8.00 | 15 | 29 | 3.3 | EN 10270-3-1.4310 | |
| 2451 | 1 | 9.25 | 8.00 | 20 | 28 | 2.4 | EN 10270-3-1.4310 | |
| 6179 | 2.5 | 12.5 | 9.70 | 22 | 367 | 52 | EN 10270-3-1.4310 | |
| 2606 | 2 | 10.3 | 8.00 | 15 | 128 | 39 | EN 10270-3-1.4310 | |
| 6130 | 2 | 10.0 | 7.75 | 18 | 252 | 42 | EN 10270-3-1.4310 | |
| 2612 | 2 | 11.3 | 9.00 | 20 | 127 | 22 | EN 10270-3-1.4310 | |
| 2618 | 2 | 12.3 | 10.00 | 15 | 138 | 29 | EN 10270-3-1.4310 | |
| 6135 | 2 | 12.5 | 10.20 | 22.5 | 222 | 21 | EN 10270-3-1.4310 | |
| 2625 | 2 | 14.3 | 12.00 | 20 | 125 | 15 | EN 10270-3-1.4310 | |
| 2640 | 2 | 18.4 | 16.00 | 20 | 114 | 11 | EN 10270-3-1.4310 |