WELCOME

Wave spring

Multi-coil wave springs are made from flat spring material and are suitable for use in applications where a low mounting dimension is required. Both the total length and working height of a multi-coil wave spring are lower than is the case in conventional round wire springs; a reduction in mounting dimension of up to 50% can be achieved.

  • Show more info about Hide more info about Wave spring

See "full-screen" models of the springs and download a PDF file of the designed compression, tension or torsion spring!

Lesjöfors configurator for compression, tension and torsion springs allows you to design a spring based on your demands. Our CAD configurator stretches from wire diameter 0,1mm up to 15mm.

Click for information about 3D CAD!

1. Choose file format

2. Choose item in the table

3. Save file

Cat.no A B L0 Fn c Mtr 3D CAD
8083 19 14 7 98 47,6 CK67 (1.1231)
8090 22,2 15,3 7 78,4 25,9 CK67 (1.1231)
8097 22,2 15,3 7 112,7 52,2 CK67 (1.1231)
8156 25,4 18,6 7 78,4 19,3 CK67 (1.1231)
8163 25,4 18,6 7 112,7 36,8 CK67 (1.1231)
8170 28,6 21,6 8 88,2 25 CK67 (1.1231)
8184 31,8 25,4 8 88,2 20 CK67 (1.1231)
8198 34,9 26,2 8 112,7 27,7 CK67 (1.1231)
S8083 19 14 7 91,14 44,268 EN 10270-3-1.4310
S8090 22,2 15,3 7 72,912 24,087 EN 10270-3-1.4310
S8097 22,2 15,3 7 104,811 48,546 EN 10270-3-1.4310
S8156 25,4 18,6 7 72,912 17,949 EN 10270-3-1.4310
S8163 25,4 18,6 7 104,811 34,224 EN 10270-3-1.4310
S8170 28,6 21,6 8 82,026 23,25 EN 10270-3-1.4310
S8177 28,6 21,6 8 123,039 40,083 EN 10270-3-1.4310
S8184 31,8 25,4 8 82,026 18,6 EN 10270-3-1.4310
S8191 31,8 25,4 8 123,039 34,224 EN 10270-3-1.4310
S8198 34,9 26,2 8 104,811 25,761 EN 10270-3-1.4310