WELCOME

Wave spring

Multi-coil wave springs are made from flat spring material and are suitable for use in applications where a low mounting dimension is required. Both the total length and working height of a multi-coil wave spring are lower than is the case in conventional round wire springs; a reduction in mounting dimension of up to 50% can be achieved.

  • Show more info about Hide more info about Wave spring
  • All measurements are in mm

See "full-screen" models of the springs and download a PDF file of the designed compression, tension or torsion spring!

Lesjöfors configurator for compression, tension and torsion springs allows you to design a spring based on your demands. Our CAD configurator stretches from wire diameter 0,1mm up to 15mm.

Click for information about 3D CAD!

1. Choose file format

2. Choose item in the table

3. Save file

Cat.no A B L0 Fn c Mtr 3D CAD
S5702 11 7,2 8,5 32,829 8,649 EN 10270-3-1.4310
S5703 11 7,2 10 32,829 6,975 EN 10270-3-1.4310
S6872 11 7,2 11 32,829 6,231 EN 10270-3-1.4310
S6984 12,7 8 9 41,013 7,626 EN 10270-3-1.4310
S6985 12,7 8 10,5 41,013 6,324 EN 10270-3-1.4310
S6986 12,7 8 12 41,013 5,673 EN 10270-3-1.4310
S6992 14,3 9,5 9 45,57 9,951 EN 10270-3-1.4310
S6993 14,3 9,5 10 45,57 8,835 EN 10270-3-1.4310
S6994 14,3 9,5 12 45,57 7,347 EN 10270-3-1.4310
S7433 15,9 11,4 9 50,127 12,741 EN 10270-3-1.4310
S7434 15,9 11,4 11 50,127 11,253 EN 10270-3-1.4310
S7635 19 14 9 54,684 16,275 EN 10270-3-1.4310
S7636 19 14 11 54,684 14,322 EN 10270-3-1.4310