WELCOME

Wave spring

Multi-coil wave springs are made from flat spring material and are suitable for use in applications where a low mounting dimension is required. Both the total length and working height of a multi-coil wave spring are lower than is the case in conventional round wire springs; a reduction in mounting dimension of up to 50% can be achieved.

  • Show more info about Hide more info about Wave spring
  • All measurements are in mm

See "full-screen" models of the springs and download a PDF file of the designed compression, tension or torsion spring!

Lesjöfors configurator for compression, tension and torsion springs allows you to design a spring based on your demands. Our CAD configurator stretches from wire diameter 0,1mm up to 15mm.

Click for information about 3D CAD!

1. Choose file format

2. Choose item in the table

3. Save file

Cat.no A B L0 Fn c Mtr 3D CAD
5697 9,5 6,4 13 29,4 5,5 CK67 (1.1231)
5698 9,5 6,4 14 29,4 5 CK67 (1.1231)
6873 11 7,2 12,5 35,3 5,8 CK67 (1.1231)
6874 11 7,2 14 35,3 5,4 CK67 (1.1231)
6882 11 7,2 15,5 35,3 4,9 CK67 (1.1231)
6987 12,7 8 14 44,1 5,3 CK67 (1.1231)
6988 12,7 8 15 44,1 4,9 CK67 (1.1231)
6989 12,7 8 17 44,1 4,4 CK67 (1.1231)
S5697 9,5 6,4 13 27,342 5,115 EN 10270-3-1.4310
S5698 9,5 6,4 14 27,342 4,65 EN 10270-3-1.4310
S6873 11 7,2 12,5 32,829 5,394 EN 10270-3-1.4310
S6874 11 7,2 14 32,829 5,022 EN 10270-3-1.4310
S6882 11 7,2 15,5 32,829 4,557 EN 10270-3-1.4310
S6987 12,7 8 14 41,013 4,929 EN 10270-3-1.4310
S6988 12,7 8 15 41,013 4,557 EN 10270-3-1.4310
S6989 12,7 8 17 41,013 4,092 EN 10270-3-1.4310