WELCOME

Wave spring

Multi-coil wave springs are made from flat spring material and are suitable for use in applications where a low mounting dimension is required. Both the total length and working height of a multi-coil wave spring are lower than is the case in conventional round wire springs; a reduction in mounting dimension of up to 50% can be achieved.

  • Show more info about Hide more info about Wave spring

See "full-screen" models of the springs and download a PDF file of the designed compression, tension or torsion spring!

Lesjöfors configurator for compression, tension and torsion springs allows you to design a spring based on your demands. Our CAD configurator stretches from wire diameter 0,1mm up to 15mm.

Click for information about 3D CAD!

1. Choose file format

2. Choose item in the table

3. Save file

Cat.no A B L0 Fn c Mtr 3D CAD
8093 22,2 15,3 13 78,4 13,3 CK67 (1.1231)
8094 22,2 15,3 15 78,4 11,6 CK67 (1.1231)
8100 22,2 15,3 13 112,7 25,4 CK67 (1.1231)
8153 22,2 15,3 15 112,7 23,3 CK67 (1.1231)
8158 25,4 18,6 15 78,4 8,6 CK67 (1.1231)
8165 25,4 18,6 15 112,7 16,6 CK67 (1.1231)
8171 28,6 21,6 13 88,2 15,2 CK67 (1.1231)
8178 28,6 21,6 13 132,3 26,6 CK67 (1.1231)
S8093 22,2 15,3 13 72,912 12,369 EN 10270-3-1.4310
S8094 22,2 15,3 15 72,912 10,788 EN 10270-3-1.4310
S8100 22,2 15,3 13 104,811 23,622 EN 10270-3-1.4310
S8153 22,2 15,3 15 104,811 21,669 EN 10270-3-1.4310
S8158 25,4 18,6 15 72,912 7,998 EN 10270-3-1.4310
S8165 25,4 18,6 15 104,811 15,438 EN 10270-3-1.4310
S8171 28,6 21,6 13 82,026 14,136 EN 10270-3-1.4310
S8178 28,6 21,6 13 123,039 24,738 EN 10270-3-1.4310