WELCOME

Wave spring

Multi-coil wave springs are made from flat spring material and are suitable for use in applications where a low mounting dimension is required. Both the total length and working height of a multi-coil wave spring are lower than is the case in conventional round wire springs; a reduction in mounting dimension of up to 50% can be achieved.

  • Show more info about Hide more info about Wave spring
  • All measurements are in mm

See "full-screen" models of the springs and download a PDF file of the designed compression, tension or torsion spring!

Lesjöfors configurator for compression, tension and torsion springs allows you to design a spring based on your demands. Our CAD configurator stretches from wire diameter 0,1mm up to 15mm.

Click for information about 3D CAD!

1. Choose file format

2. Choose item in the table

3. Save file

Cat.no A B L0 Fn c Mtr 3D CAD
6995 14,3 9,5 13 49 7,2 CK67 (1.1231)
6996 14,3 9,5 15 49 6,1 CK67 (1.1231)
6997 14,3 9,5 17 49 5,8 CK67 (1.1231)
7496 15,9 11,4 14 53,9 9,5 CK67 (1.1231)
7497 15,9 11,4 17 53,9 7,7 CK67 (1.1231)
7637 19 14 13 58,8 12,3 CK67 (1.1231)
7729 19 14 15 58,8 11,2 CK67 (1.1231)
8086 19 14 13 98 23,3 CK67 (1.1231)
8087 19 14 15 98 21,7 CK67 (1.1231)
S6995 14,3 9,5 13 45,57 6,696 EN 10270-3-1.4310
S6996 14,3 9,5 15 45,57 5,673 EN 10270-3-1.4310
S6997 14,3 9,5 17 45,57 5,394 EN 10270-3-1.4310
S7496 15,9 11,4 14 50,127 8,835 EN 10270-3-1.4310
S7497 15,9 11,4 17 50,127 7,161 EN 10270-3-1.4310
S7637 19 14 13 54,684 11,439 EN 10270-3-1.4310
S7729 19 14 15 54,684 10,416 EN 10270-3-1.4310
S8086 19 14 13 91,14 21,669 EN 10270-3-1.4310
S8087 19 14 15 91,14 20,181 EN 10270-3-1.4310