WELCOME

Wave spring

Multi-coil wave springs are made from flat spring material and are suitable for use in applications where a low mounting dimension is required. Both the total length and working height of a multi-coil wave spring are lower than is the case in conventional round wire springs; a reduction in mounting dimension of up to 50% can be achieved.

  • Show more info about Hide more info about Wave spring

See "full-screen" models of the springs and download a PDF file of the designed compression, tension or torsion spring!

Lesjöfors configurator for compression, tension and torsion springs allows you to design a spring based on your demands. Our CAD configurator stretches from wire diameter 0,1mm up to 15mm.

Click for information about 3D CAD!

1. Choose file format

2. Choose item in the table

3. Save file

Cat.no A B L0 Fn c Mtr 3D CAD
8179 28,6 21,6 18 132,3 18,9 CK67 (1.1231)
8180 28,6 21,6 26 132,3 13 CK67 (1.1231)
8193 31,8 25,4 18 132,3 16,6 CK67 (1.1231)
8194 31,8 25,4 26 132,3 11,4 CK67 (1.1231)
8207 34,9 26,2 18 156,8 17,2 CK67 (1.1231)
8208 34,9 26,2 26 156,8 12,1 CK67 (1.1231)
8214 38,1 29 18 156,8 15,1 CK67 (1.1231)
8233 38,1 29 26 156,8 10,3 CK67 (1.1231)
8528 38,1 29 18 264,6 34 CK67 (1.1231)
8529 38,1 29 26 264,6 23,6 CK67 (1.1231)
8928 44,5 34 22 220,5 21 CK67 (1.1231)
8942 50,8 40,6 22 220,5 16,6 CK67 (1.1231)
S8207 34,9 26,2 18 145,824 15,996 EN 10270-3-1.4310
S8208 34,9 26,2 26 145,824 11,253 EN 10270-3-1.4310
S8214 38,1 29 18 145,824 14,043 EN 10270-3-1.4310
S8233 38,1 29 26 145,824 9,579 EN 10270-3-1.4310
S8528 38,1 29 18 246,078 31,62 EN 10270-3-1.4310
S8529 38,1 29 26 246,078 21,948 EN 10270-3-1.4310
S8928 44,5 34 22 205,065 19,53 EN 10270-3-1.4310
S8935 44,5 34 22 373,674 50,034 EN 10270-3-1.4310
S8942 50,8 40,6 22 205,065 15,438 EN 10270-3-1.4310
S8949 50,8 40,6 22 373,674 36,177 EN 10270-3-1.4310