WELCOME

Wave spring

Multi-coil wave springs are made from flat spring material and are suitable for use in applications where a low mounting dimension is required. Both the total length and working height of a multi-coil wave spring are lower than is the case in conventional round wire springs; a reduction in mounting dimension of up to 50% can be achieved.

  • Show more info about Hide more info about Wave spring

See "full-screen" models of the springs and download a PDF file of the designed compression, tension or torsion spring!

Lesjöfors configurator for compression, tension and torsion springs allows you to design a spring based on your demands. Our CAD configurator stretches from wire diameter 0,1mm up to 15mm.

Click for information about 3D CAD!

1. Choose file format

2. Choose item in the table

3. Save file

Cat.no A B L0 Fn c Mtr 3D CAD
S7899 19 14 19 54,684 8,184 EN 10270-3-1.4310
S8088 19 14 19 91,14 15,996 EN 10270-3-1.4310
S8089 19 14 25 91,14 11,904 EN 10270-3-1.4310
S8095 22,2 15,3 19 72,912 8,184 EN 10270-3-1.4310
S8154 22,2 15,3 19 104,811 16,926 EN 10270-3-1.4310
S8155 22,2 15,3 26 104,811 12,741 EN 10270-3-1.4310
S8166 25,4 18,6 26 104,811 8,835 EN 10270-3-1.4310
S8172 28,6 21,6 18 82,026 10,23 EN 10270-3-1.4310
S8179 28,6 21,6 18 123,039 17,577 EN 10270-3-1.4310
S8180 28,6 21,6 26 123,039 12,09 EN 10270-3-1.4310
S8186 31,8 25,4 18 82,026 8,184 EN 10270-3-1.4310
S8193 31,8 25,4 18 123,039 15,438 EN 10270-3-1.4310
S8194 31,8 25,4 26 123,039 10,602 EN 10270-3-1.4310
S8200 34,9 26,2 18 104,811 11,253 EN 10270-3-1.4310
S8201 34,9 26,2 26 104,811 7,998 EN 10270-3-1.4310
S8207 34,9 26,2 18 145,824 15,996 EN 10270-3-1.4310
S8208 34,9 26,2 26 145,824 11,253 EN 10270-3-1.4310
S8214 38,1 29 18 145,824 14,043 EN 10270-3-1.4310
S8233 38,1 29 26 145,824 9,579 EN 10270-3-1.4310
S8928 44,5 34 22 205,065 19,53 EN 10270-3-1.4310
S8942 50,8 40,6 22 205,065 15,438 EN 10270-3-1.4310