WELCOME

Wave spring

Multi-coil wave springs are made from flat spring material and are suitable for use in applications where a low mounting dimension is required. Both the total length and working height of a multi-coil wave spring are lower than is the case in conventional round wire springs; a reduction in mounting dimension of up to 50% can be achieved.

  • Show more info about Hide more info about Wave spring
  • All measurements are in mm

See "full-screen" models of the springs and download a PDF file of the designed compression, tension or torsion spring!

Lesjöfors configurator for compression, tension and torsion springs allows you to design a spring based on your demands. Our CAD configurator stretches from wire diameter 0,1mm up to 15mm.

Click for information about 3D CAD!

1. Choose file format

2. Choose item in the table

3. Save file

Cat.no A B L0 Fn c Mtr 3D CAD
8095 22,2 15,3 19 78,4 8,8 CK67 (1.1231)
8096 22,2 15,3 26 78,4 6,7 CK67 (1.1231)
8154 22,2 15,3 19 112,7 18,2 CK67 (1.1231)
8155 22,2 15,3 26 112,7 13,7 CK67 (1.1231)
8159 25,4 18,6 26 78,4 4,9 CK67 (1.1231)
8166 25,4 18,6 26 112,7 9,5 CK67 (1.1231)
8172 28,6 21,6 18 88,2 11 CK67 (1.1231)
8173 28,6 21,6 26 88,2 7,5 CK67 (1.1231)
8179 28,6 21,6 18 132,3 18,9 CK67 (1.1231)
8180 28,6 21,6 26 132,3 13 CK67 (1.1231)
S8095 22,2 15,3 19 72,912 8,184 EN 10270-3-1.4310
S8096 22,2 15,3 26 72,912 6,231 EN 10270-3-1.4310
S8154 22,2 15,3 19 104,811 16,926 EN 10270-3-1.4310
S8155 22,2 15,3 26 104,811 12,741 EN 10270-3-1.4310
S8159 25,4 18,6 26 72,912 4,557 EN 10270-3-1.4310
S8166 25,4 18,6 26 104,811 8,835 EN 10270-3-1.4310
S8172 28,6 21,6 18 82,026 10,23 EN 10270-3-1.4310
S8173 28,6 21,6 26 82,026 6,975 EN 10270-3-1.4310
S8179 28,6 21,6 18 123,039 17,577 EN 10270-3-1.4310
S8180 28,6 21,6 26 123,039 12,09 EN 10270-3-1.4310