WELCOME

Wave spring

Multi-coil wave springs are made from flat spring material and are suitable for use in applications where a low mounting dimension is required. Both the total length and working height of a multi-coil wave spring are lower than is the case in conventional round wire springs; a reduction in mounting dimension of up to 50% can be achieved.

  • Show more info about Hide more info about Wave spring
  • All measurements are in mm

See "full-screen" models of the springs and download a PDF file of the designed compression, tension or torsion spring!

Lesjöfors configurator for compression, tension and torsion springs allows you to design a spring based on your demands. Our CAD configurator stretches from wire diameter 0,1mm up to 15mm.

Click for information about 3D CAD!

1. Choose file format

2. Choose item in the table

3. Save file

Cat.no A B L0 Fn c Mtr 3D CAD
8160 25,4 18,6 32 78,4 4 CK67 (1.1231)
8161 25,4 18,6 38 78,4 3,3 CK67 (1.1231)
8167 25,4 18,6 32 112,7 7,9 CK67 (1.1231)
8168 25,4 18,6 38 112,7 6,3 CK67 (1.1231)
8174 28,6 21,6 33 88,2 6 CK67 (1.1231)
8175 28,6 21,6 40 88,2 4,7 CK67 (1.1231)
8181 28,6 21,6 33 132,3 10,2 CK67 (1.1231)
8182 28,6 21,6 40 132,3 8,2 CK67 (1.1231)
S8160 25,4 18,6 32 72,912 3,72 EN 10270-3-1.4310
S8161 25,4 18,6 38 72,912 3,069 EN 10270-3-1.4310
S8167 25,4 18,6 32 104,811 7,347 EN 10270-3-1.4310
S8168 25,4 18,6 38 104,811 5,859 EN 10270-3-1.4310
S8174 28,6 21,6 33 82,026 5,58 EN 10270-3-1.4310
S8175 28,6 21,6 40 82,026 4,371 EN 10270-3-1.4310
S8181 28,6 21,6 33 123,039 9,486 EN 10270-3-1.4310
S8182 28,6 21,6 40 123,039 7,626 EN 10270-3-1.4310