WELCOME

1295: CS 0,75X4,75X40

All dimensions are in mm
Dt = Wire diameter
Dm = Mean diameter
Lo = Unloaded length
nt = Total number of coils
Po = Pitch
Ln = Permitted loaded length for dynamic load
Fn = Spring force in Newtons at Ln
c = Rate
Lst = Solid length = Dt x nt
s = Deflection
Coiling: Right hand

Material:
Dt 0.20–10 = EN 10270-1-SM
Dt 12–14 = EN 10270-1-SH

Tolerances:
You can find information about tolerances for our springs if you follow this link.

Max. working temperature:
EN 10270-1 = 120 °C

Springs with Dt ≤ 0.4 do not have ground end coils, others have 3/4 end coils ground. Springs with Dt ≥ 2.0 are shot peened. Static loaded springs or springs with a low number of intended load deflections can be allowed to be scragged to solid length (Lst). A certain relaxation (load loss) will then appear.

1 kp = 9.80665 Newtons, 1 Newton = 0.10197 kp

1. Choose file format

2. Choose item in table

3. Save file

Compression spring

Dimensions and characteristics
Part number 1295
Dt 0.75
Di 4
Dm 4.75
L0 40
nt 26
Po 1,6
Ln 22.4
Fn 22.08
c 1.25
Code Ground end coils
Mtr EN 10270-1-SM
Tillåten utökad längd för dynamisk belastning
Ange L1:
Resultat:
  • F (Fjäderkraft) =   00.00   Newton
  • S (Avböjning ) =   00.00   mm