WELCOME

CS 10X60,8X250

All dimensions are in mm
Dt = Wire diameter
Dm = Mean diameter
Lo = Unloaded length
nt = Total number of coils
Po = Pitch
Ln = Permitted loaded length for dynamic load
Fn = Spring force in Newtons at Ln
c = Rate
Lst = Solid length = Dt x nt
s = Deflection
Coiling: Right hand

Material:
Dt 0.20–10 = EN 10270-1-SM
Dt 12–14 = EN 10270-1-SH

Tolerances:
You can find information about tolerances for our springs if you follow this link.

Max. working temperature:
EN 10270-1 = 120 °C

Springs with Dt ≤ 0.4 do not have ground end coils, others have 3/4 end coils ground. Springs with Dt ≥ 2.0 are shot peened. Static loaded springs or springs with a low number of intended load deflections can be allowed to be scragged to solid length (Lst). A certain relaxation (load loss) will then appear.

1 kp = 9.80665 Newtons, 1 Newton = 0.10197 kp

Compression spring

1. Choose file format

2. Choose item in table

3. Save file

Dimensions and characteristics
Part number 2184
Dt 10
Dm 60.8
Di min 50.0
L0 250
nt 15.3
Po 17,3
Ln 174
Fn 2601
c 34
Code Ground end coils
Mtr EN 10270-1-SM
Tillåten utökad längd för dynamisk belastning
Ange L1:
Resultat:
  • F (Fjäderkraft) =   00.00   Newton
  • S (Avböjning ) =   00.00   mm