WELCOME

CS 10X63X200

All dimensions are in mm
Dt = Wire diameter
Dm = Mean diameter
Lo = Unloaded length
nt = Total number of coils
Po = Pitch
Ln = Permitted loaded length for dynamic load
Fn = Spring force in Newtons at Ln
c = Rate
Lst = Solid length = Dt x nt
s = Deflection
Coiling: Right hand

Material:
Dt 0.20–10 = EN 10270-1-SM
Dt 12–14 = EN 10270-1-SH

Tolerances:
You can find information about tolerances for our springs if you follow this link.

Max. working temperature:
EN 10270-1 = 120 °C

Springs with Dt ≤ 0.4 do not have ground end coils, others have 3/4 end coils ground. Springs with Dt ≥ 2.0 are shot peened. Static loaded springs or springs with a low number of intended load deflections can be allowed to be scragged to solid length (Lst). A certain relaxation (load loss) will then appear.

1 kp = 9.80665 Newtons, 1 Newton = 0.10197 kp

1. Choose file format

2. Choose item in table

3. Save file

Compression spring

Dimensions and characteristics
Part number 6652
Dt 10
Dm 63.0
Di min 52.2
L0 200
nt 10.5
Po
Ln 119
Fn 3901
c 48
Code Ground end coils
Mtr EN 10270-1-SH
Tillåten utökad längd för dynamisk belastning
Ange L1:
Resultat:
  • F (Fjäderkraft) =   00.00   Newton
  • S (Avböjning ) =   00.00   mm