Disc Spring low force

The dimensions are adapted to standard ball bearings and are used primarily for eliminating axial play. Normally, they are fitted with the outer diameter against the outer ring of the bearing. These springs produce a relatively low force and can of course also be used in other designs. In addition to the dimensions listed below, we can also supply springs with an outer diameter of up to 358 mm upon request.

Read more on our homepage: - General information about disc springs

  • Show more info about Hide more info about Disc Spring low force
  • All measurements are in mm

See "full-screen" models of the springs and download a PDF file of the designed compression, tension or torsion spring!

Lesjöfors configurator for compression, tension and torsion springs allows you to design a spring based on your demands. Our CAD configurator stretches from wire diameter 0,1mm up to 15mm.

Click for information about 3D CAD!

1. Choose file format

2. Choose item in the table

3. Save file

Cat.no De Di t L0 h0 s 75% F 75% 3D CAD
5064 149 95,5 1,5 3,2 1,7 1,275 379,4
5065 149 106 1,5 3,2 1,7 1,275 450,2