WELCOME

Wave spring

Multi-coil wave springs are made from flat spring material and are suitable for use in applications where a low mounting dimension is required. Both the total length and working height of a multi-coil wave spring are lower than is the case in conventional round wire springs; a reduction in mounting dimension of up to 50% can be achieved.

  • Show more info about Hide more info about Wave spring
  • All measurements are in mm

See "full-screen" models of the springs and download a PDF file of the designed compression, tension or torsion spring!

Lesjöfors configurator for compression, tension and torsion springs allows you to design a spring based on your demands. Our CAD configurator stretches from wire diameter 0,1mm up to 15mm.

Click for information about 3D CAD!

1. Choose file format

2. Choose item in the table

3. Save file

Cat.no A B L0 Fn c Mtr 3D CAD
8084 19 14 10 98 32,6 CK67 (1.1231)
8085 19 14 11 98 30,6 CK67 (1.1231)
8091 22,2 15,3 9 78,4 18,9 CK67 (1.1231)
8092 22,2 15,3 11 78,4 15,6 CK67 (1.1231)
8098 22,2 15,3 9 112,7 36,8 CK67 (1.1231)
8099 22,2 15,3 11 112,7 31,5 CK67 (1.1231)
8157 25,4 18,6 11 78,4 11,7 CK67 (1.1231)
8164 25,4 18,6 11 112,7 23,1 CK67 (1.1231)
S8084 19 14 10 91,14 30,318 EN 10270-3-1.4310
S8085 19 14 11 91,14 28,458 EN 10270-3-1.4310
S8091 22,2 15,3 9 72,912 17,577 EN 10270-3-1.4310
S8092 22,2 15,3 11 72,912 14,508 EN 10270-3-1.4310
S8098 22,2 15,3 9 104,811 34,224 EN 10270-3-1.4310
S8099 22,2 15,3 11 104,811 29,295 EN 10270-3-1.4310
S8157 25,4 18,6 11 72,912 10,881 EN 10270-3-1.4310
S8164 25,4 18,6 11 104,811 21,483 EN 10270-3-1.4310