WELCOME

Wave spring

Multi-coil wave springs are made from flat spring material and are suitable for use in applications where a low mounting dimension is required. Both the total length and working height of a multi-coil wave spring are lower than is the case in conventional round wire springs; a reduction in mounting dimension of up to 50% can be achieved.

  • Show more info about Hide more info about Wave spring
  • All measurements are in mm

See "full-screen" models of the springs and download a PDF file of the designed compression, tension or torsion spring!

Lesjöfors configurator for compression, tension and torsion springs allows you to design a spring based on your demands. Our CAD configurator stretches from wire diameter 0,1mm up to 15mm.

Click for information about 3D CAD!

1. Choose file format

2. Choose item in the table

3. Save file

Cat.no A B L0 Fn c Mtr 3D CAD
8188 31,8 25,4 33 88,2 4,9 CK67 (1.1231)
8189 31,8 25,4 40 88,2 3,9 CK67 (1.1231)
8202 34,9 26,2 33 112,7 6,5 CK67 (1.1231)
8203 34,9 26,2 40 112,7 5,4 CK67 (1.1231)
S8188 31,8 25,4 33 82,026 4,557 EN 10270-3-1.4310
S8189 31,8 25,4 40 82,026 3,627 EN 10270-3-1.4310
S8196 31,8 25,4 40 123,039 6,882 EN 10270-3-1.4310
S8202 34,9 26,2 33 104,811 6,045 EN 10270-3-1.4310
S8203 34,9 26,2 40 104,811 5,022 EN 10270-3-1.4310
S8210 34,9 26,2 40 145,824 6,975 EN 10270-3-1.4310